CompleteInstallation, Adjust Flame Height

CompleteInstallation

Electronic Ignition System

Initial Lighting and Gas Flame Adjustments

Surface burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the LITE position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to LITE.

The grill and griddle burner use an igniter glow bar that is either on or off in place of standing pilots. When the glow bar is hot, it sends a signal back to the safety valve which opens allowing gas to flow to the grill and griddle burner.

Adjust Flame Height

NOTE: There is no adjustment for the griddle flame. Gas flow is at 100%, temperature is controlled by a thermostat.

The surface burner or grill “low” flame should be a steady blue flame approximately ¼" (0.64 cm) high.

Check Operation of Surface Burners, Grill and Griddle

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Push in and turn the surface burners and grill control knobs to the LITE position. For griddles, turn the griddle control knob to a temperature degree mark (300° recommended).

The surface burner flame should light within 4 seconds. The first time a surface burner is lit it may take longer than

10 seconds to light because of air in the gas line.

3.Check the flame on HI for a blue color. It should be clean and soft in character. No yellow tip, blowing or lifting of flame should occur. Occasional orange flashes are normal and reflect different elements in the air or gas.

The grill and griddle flame should light in 30 to 40 seconds. The griddle flame cannot be seen, but you should hear it ignite and feel heat from the griddle.

4.After verifying the proper burner operation, turn the control knobs to OFF.

If burners do not light properly:

■Turn surface burner control knob to the OFF position.

■Check that the power supply cord is plugged in and the circuit breaker has not tripped or the fuse blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Recheck operation of surface burners, grill and griddle. If a burner does not light at this point, contact your dealer or authorized service company for assistance.

A.Low flame

B.High flame

If the “low” flame needs to be adjusted:

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

A. Adjustment screw

1.Remove the control knob.

2.Hold the knob stem with a pair of pliers. Use a small flat- blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from LO to HI, checking the flame at each setting.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your cooktop.

KGCP484KSS specifications

The KitchenAid KGCP484KSS is a premium gas cooktop that brings precision and performance to your kitchen. Designed for the discerning home chef, this model offers a range of features and technologies that ensure you can create culinary masterpieces with ease and efficiency.

One of the standout features of the KGCP484KSS is its four powerful burners, which provide versatility and control for various cooking techniques. The simmer burner is designed to maintain low temperatures, perfect for delicate sauces or melting chocolate without scorching. On the other hand, the high-output burner allows for quick boiling and searing, making it excellent for high-heat cooking. Additionally, the even heat distribution of each burner ensures consistent cooking results.

The cooktop features a sleek stainless steel surface that not only enhances its aesthetic appeal but also ensures durability and ease of cleaning. The spill-resistant burner design minimizes mess, allowing for quick cleanup after cooking. The heavy-duty cast iron grates are both robust and convenient, with a continuous design that allows for smooth movement of pots and pans across the surface.

For added convenience, the KGCP484KSS is equipped with an electronic ignition system that provides a reliable start every time, eliminating the need for matches or lighters. The cooktop also includes a professional-style knob control system that allows for precise temperature adjustments, giving you greater control over your cooking.

The KitchenAid KGCP484KSS is designed not only for performance but also for safety. The unit comes with a flame failure safety device, which automatically shuts off the gas if the flame goes out, ensuring peace of mind while cooking.

In terms of installation, this model features a well-thought-out design that fits seamlessly into various kitchen styles. It can be installed in both traditional and modern kitchens, making it a versatile option for any home chef.

Overall, the KitchenAid KGCP484KSS gas cooktop is an exceptional choice for those looking to elevate their cooking experience. With its powerful burners, durable construction, and thoughtful features, it embodies convenience, style, and professional-grade performance, allowing you to cook with confidence and creativity.

KitchenAid KGCP484KSS installation instructions CompleteInstallation, Adjust Flame Height

Models: KGCP484KSS