3.Install the pressure regulator with the arrow pointing up towars the bottom of the burner box and in a position where you can reach the regulator cap.

IMPORTANT: All connections must be wrench-tightened. Do not make connections to the gas regulator too tight. Making the connections too tight may crack the regulator and cause a gas leak. Do not allow the regulator to turn on the pipe when tightening fittings.

Use only pipe-joint compound made for use with Natural and LP gas. Do not use TEFLON® tape.

You will need to determine the fittings required depending on your installation.

Typical flexible connection

1.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see C and F in following illustration).

2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

A

B

C

 

H

 

D

 

 

 

E F

G

A. Gas pressure regulator

E. Use pipe-joint compound.

B. Use pipe-joint compound.

F. Adapter

 

C. Adapter - Must have ½"

G. ½" or ¾" gas pipe

male pipe thread

H. Manual gas shutoff valve

D. Flexible connector

 

 

Complete Connection

1.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A

B

A. Closed valve

B. Open valve

2.Test all connections by brushing on an approved noncorrosive leak-detection solution. If bubbles appear, a leak is indicated. Correct any leak found.

3.Remove surface burner caps and grates from parts package. Align notches in burner caps with pins in burner base. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light.

Place burner grates over burners and caps.

B

A

C

A. Igniter electrode

B. Burner cap

C. Burner base

4.If your cooktop only has surface burners, see “Check Operation of Surface Burners, Grill and Griddle” section in the “Complete Installation” section.

5.If your model was shipped with a grill or griddle, see “Install Grill” or “Install Griddle” section.

Install Grill

(on some models)

1.Remove twist tie and discard. Lift burner assembly out of basin and set aside.

A

A. Burner assembly

2.Place drip tray on bottom of grill basin and slide the tray toward the back so that it is located side to side and against the locating feet of the rear spill guard.

A

B

C

A. Rear spill guard

B. Locating feet

C. Drip tray

10

Page 9 Page 11
Page 10
Image 10
KitchenAid KGCP484KSS installation instructions Install Grill, Typical flexible connection, Complete Connection
Page 9 Page 11

KGCP484KSS specifications

The KitchenAid KGCP484KSS is a premium gas cooktop that brings precision and performance to your kitchen. Designed for the discerning home chef, this model offers a range of features and technologies that ensure you can create culinary masterpieces with ease and efficiency.

One of the standout features of the KGCP484KSS is its four powerful burners, which provide versatility and control for various cooking techniques. The simmer burner is designed to maintain low temperatures, perfect for delicate sauces or melting chocolate without scorching. On the other hand, the high-output burner allows for quick boiling and searing, making it excellent for high-heat cooking. Additionally, the even heat distribution of each burner ensures consistent cooking results.

The cooktop features a sleek stainless steel surface that not only enhances its aesthetic appeal but also ensures durability and ease of cleaning. The spill-resistant burner design minimizes mess, allowing for quick cleanup after cooking. The heavy-duty cast iron grates are both robust and convenient, with a continuous design that allows for smooth movement of pots and pans across the surface.

For added convenience, the KGCP484KSS is equipped with an electronic ignition system that provides a reliable start every time, eliminating the need for matches or lighters. The cooktop also includes a professional-style knob control system that allows for precise temperature adjustments, giving you greater control over your cooking.

The KitchenAid KGCP484KSS is designed not only for performance but also for safety. The unit comes with a flame failure safety device, which automatically shuts off the gas if the flame goes out, ensuring peace of mind while cooking.

In terms of installation, this model features a well-thought-out design that fits seamlessly into various kitchen styles. It can be installed in both traditional and modern kitchens, making it a versatile option for any home chef.

Overall, the KitchenAid KGCP484KSS gas cooktop is an exceptional choice for those looking to elevate their cooking experience. With its powerful burners, durable construction, and thoughtful features, it embodies convenience, style, and professional-grade performance, allowing you to cook with confidence and creativity.
Top Page Image Contents