Gas Supply Line

■Provide a gas supply line of ³⁄₄" (1.9 cm) rigid pipe to the cooktop location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size can be ½" minimum. Usually, LP gas suppliers determine the size and materials used in the system.

Flexible metal appliance connector:

■If local codes permit, use a ⁵⁄₈" flexible stainless steel tubing gas connector, designed by CSA to connect the cooktop to the rigid gas supply line.

Gas Pressure Regulator

The gas pressure regulator supplied with this cooktop must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural Gas:

Minimum pressure: 6" (15.2 cm) WCP

Maximum pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP

LP Gas:

Minimum pressure: 11" (27.9 cm) WCP

Maximum pressure: 14" (35.5 cm) WCP

Contact local gas supplier if you are not sure about the inlet pressure.

■A ½" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance pressure regulator.

■Do not kink or damage the flexible metal tubing when moving the cooktop.

Rigid pipe connection:

The rigid pipe connection requires a combination of pipe fittings to obtain an in-line connection to the cooktop. The rigid pipe must be level with the cooktop connection. All strains must be removed from the supply and fuel lines so cooktop will be level and in line.

■Must include a shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the cooktop. It should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the cooktop.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To cooktop

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

Burner Input Requirements

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level (not applicable for Canada).

Gas Supply Pressure Testing

Line pressure testing above ½ psi gauge (14" WCP)

The cooktop and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The cooktop must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

8

Page 7 Page 9
Page 8
Image 8
KitchenAid KGCP484KSS Gas Supply Line, Gas Pressure Regulator, Burner Input Requirements, Gas Supply Pressure Testing
Page 7 Page 9

KGCP484KSS specifications

The KitchenAid KGCP484KSS is a premium gas cooktop that brings precision and performance to your kitchen. Designed for the discerning home chef, this model offers a range of features and technologies that ensure you can create culinary masterpieces with ease and efficiency.

One of the standout features of the KGCP484KSS is its four powerful burners, which provide versatility and control for various cooking techniques. The simmer burner is designed to maintain low temperatures, perfect for delicate sauces or melting chocolate without scorching. On the other hand, the high-output burner allows for quick boiling and searing, making it excellent for high-heat cooking. Additionally, the even heat distribution of each burner ensures consistent cooking results.

The cooktop features a sleek stainless steel surface that not only enhances its aesthetic appeal but also ensures durability and ease of cleaning. The spill-resistant burner design minimizes mess, allowing for quick cleanup after cooking. The heavy-duty cast iron grates are both robust and convenient, with a continuous design that allows for smooth movement of pots and pans across the surface.

For added convenience, the KGCP484KSS is equipped with an electronic ignition system that provides a reliable start every time, eliminating the need for matches or lighters. The cooktop also includes a professional-style knob control system that allows for precise temperature adjustments, giving you greater control over your cooking.

The KitchenAid KGCP484KSS is designed not only for performance but also for safety. The unit comes with a flame failure safety device, which automatically shuts off the gas if the flame goes out, ensuring peace of mind while cooking.

In terms of installation, this model features a well-thought-out design that fits seamlessly into various kitchen styles. It can be installed in both traditional and modern kitchens, making it a versatile option for any home chef.

Overall, the KitchenAid KGCP484KSS gas cooktop is an exceptional choice for those looking to elevate their cooking experience. With its powerful burners, durable construction, and thoughtful features, it embodies convenience, style, and professional-grade performance, allowing you to cook with confidence and creativity.
Top Page Image Contents