Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

IMPORTANT: The cooktop must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.

This cooktop is equipped with an electronic ignition system that will not operate if plugged into an outlet that is not properly polarized.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

■A 120 volt, 60 Hz, AC only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this cooktop be provided.

■Electronic ignition systems operate within wide voltage limits, but proper grounding and polarity are necessary. Check that the outlet provides 120-volt power and is correctly grounded.

■The wiring diagrams are provided with this cooktop. See “Wiring Diagrams” section.

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149 - latest edition.

IMPORTANT: Leak testing of the cooktop must be conducted according to the manfacturer’s instructions.

Type of Gas

Natural Gas:

This cooktop is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

■This cooktop is factory-set for use with Natural gas. To convert to LP gas, see the Gas Conversion instructions provided in the literature package. The model/serial rating plate located on the left underside of the burner box has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP Gas conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the cooktop from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. See the Gas Conversion instructions provided in the literature package.

7

Page 6 Page 8
Page 7
Image 7
KitchenAid KGCP484KSS Electrical Requirements, Gas Supply Requirements, Type of Gas, Natural Gas, LP Gas conversion
Page 6 Page 8

KGCP484KSS specifications

The KitchenAid KGCP484KSS is a premium gas cooktop that brings precision and performance to your kitchen. Designed for the discerning home chef, this model offers a range of features and technologies that ensure you can create culinary masterpieces with ease and efficiency.

One of the standout features of the KGCP484KSS is its four powerful burners, which provide versatility and control for various cooking techniques. The simmer burner is designed to maintain low temperatures, perfect for delicate sauces or melting chocolate without scorching. On the other hand, the high-output burner allows for quick boiling and searing, making it excellent for high-heat cooking. Additionally, the even heat distribution of each burner ensures consistent cooking results.

The cooktop features a sleek stainless steel surface that not only enhances its aesthetic appeal but also ensures durability and ease of cleaning. The spill-resistant burner design minimizes mess, allowing for quick cleanup after cooking. The heavy-duty cast iron grates are both robust and convenient, with a continuous design that allows for smooth movement of pots and pans across the surface.

For added convenience, the KGCP484KSS is equipped with an electronic ignition system that provides a reliable start every time, eliminating the need for matches or lighters. The cooktop also includes a professional-style knob control system that allows for precise temperature adjustments, giving you greater control over your cooking.

The KitchenAid KGCP484KSS is designed not only for performance but also for safety. The unit comes with a flame failure safety device, which automatically shuts off the gas if the flame goes out, ensuring peace of mind while cooking.

In terms of installation, this model features a well-thought-out design that fits seamlessly into various kitchen styles. It can be installed in both traditional and modern kitchens, making it a versatile option for any home chef.

Overall, the KitchenAid KGCP484KSS gas cooktop is an exceptional choice for those looking to elevate their cooking experience. With its powerful burners, durable construction, and thoughtful features, it embodies convenience, style, and professional-grade performance, allowing you to cook with confidence and creativity.
Top Page Image Contents