5,000 Btu/h Simmer/Melt Burner
A
A. Incorrect
B. Correct
B
5.Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist.
SureSear™ Grill
(on some models)
A
BD
C
E
F
A. Grill grate | D. Flame spreader |
B. Wave tray | E. Grease trays |
C. Burner assembly | F. Drip tray |
The grill module consists of a
When using the grill, follow the guidelines below.
■Trim excess fat to reduce spattering. Slit the remaining fat on the edges to avoid curling.
■Allow space between food on the grill. Crowding food will result in uneven cooking.
■Use a metal spatula or tongs to turn food.
■Steaks, chops and hamburgers should be turned only once to avoid loss of juices.
■For even cooking, foods such as chicken quarters should be turned several times.
■To check for doneness of meats and poultry, use an instant read thermometer or make a small cut in the center of the food. This will avoid loss of juices.
■Do not leave the grill unattended while cooking.
■Do not use aluminum foil, charcoal or wood chips.
■To avoid damage to cookware, do not place cookware on the grill when in use. Food should be cooked directly on the grill grate.
Before removing or replacing grill, make sure the control knobs are turned to OFF. Allow the grill to cool completely before handling.
To Remove:
1.Remove grill grate and wave tray.
2.Pull forward slightly on the flame spreader to release the tabs from the rear slots and lift out.
B
A
A. Grill front
B. Rear tabs and slots
3.Lift up and out to remove the burner assembly.
Remove Grease Trays:
1.To remove the small grease tray, unhook tabs from slots and lift slightly to disengage it from the large grease tray.
A
B
C 
D
A. Large grease tray
B. Grease tray connection
C. Small grease tray
D.Slots
2.Unhook tabs from slots and lift out the large grease tray.
B
A
A. Large grease tray
B. Slots
9
