Read these instructions to get the best out of your
burners:
- Use pans with a diameter the same as the burner
(see pan diameter table to the side).
- Only use flat bottom pots and pans.
- Use the right amount of water for cooking food
and use the lid.
Important: using the pan supports incorrectly will
scratch the hob top: avoid placing them upside
down or dragging them across the hob.
You should never use:
- Cast iron or steatite stone grills, terracotta pots
or pans.
- Convectors such as metal netting or other.
- The use of two burners simultaneously with just
one container such as a fish kettle.
Failure comply with these recommendations
could lead to your glass ceramic hob being
damaged, or broken and/or the safety of your
equipment being compromised.
Burner Pan diameter
both crowns from 24 to 26 cm
only the internal crown from 8 to 14 cm
IMPORTANT
To get the most out of your burner as well as
its flexibility, use it in the positions shown in
the flame regulation symbols indicated in the
diagrams above. The button positions
corresponding with the continuous sections in
the diagram to the right shows maximum
functioning areas and make the most of the
burner’s capacity.
Practical advice on how to use the burners
Category II2H3+
Type of gas used Type of Injector Injector Injector Nominal heat Nominal Reduced heat Gas pressure (mbar)
burner marking distance distance flow kW consumption flow kW min. nom. max
(X) mm (Y) mm
NATURAL GAS Dual crown 140 + 34 7,5 - 4,20 400 l/h 1,70
(Methane) 17 20 25
G20 Internal crown 34 - open 0,50 48 l/h 0,25
GAS Dual crown 86 +13 11 - 3,78 275 g/h 1,70
LIQUID PETROLEUM 20 28-30 35
(Butane) G30 Internal crown 13 - open 0,45 33 g/h 0,25
GAS Dual crown 86 + 13 11 - 3,78 270 g/h 1,70
LIQUID PETROLEUM 25 37 45
(Propane) G31 Internal crown 13 - open 0,45 32 g/h 0,25
Type of gas used Configuration Heat flow Total consumption Required air (m3)
model nominal kW nominal for the combustion of 1 m3of gas
G2020 mbar 3 burners 12,60 1200 l/h 9,52
G3028-30 mbar 3 burners 11,34 825 g/h 30,94
G3137 mbar 3 burners 11,34 810 g/h 23,80
Electrical: 230 V - 50 Hz - 3,6 kW Type PLMFT
Injectors table
5