7
English
ASSEMBLINg ThE BLENDERPARTS AND FEATURES
2Rotate pitcher clockwise, approximately
1/8 turn until pitcher clicks into place. 3Adjust the length of the Blender power
cord.
4Put lid on pitcher.
NOTE: When properly positioned, pitcher
will rest completely on Blender base. If not,
repeat steps 1 and 2.
IMPORTANT: When moving your blender,
always support/lift from the blender base.
Base may become disengaged from jar if
carried by jar handle only.
6Before removing the pitcher from the
base, always press POWER to stop the
flashing lights and unplug the power
cord.
5Before using the Blender, plug into a
grounded 3-prong outlet, and press
POWER. The Power indicator light will
flash when ready.
ASSEMBLINg ThE BLENDER
W10575361A_Final.indd 7 4/2/13 4:20 PM