KitchenAid KSSC42FTS, KSSC48FTS Backer Panels, Dispenser Frame dispenser models only, Model D

Backer Panels

NOTES:

■Dashed lines represent placement of backer panels on overlay panels.

■Illustration shows backer panels placed on decorative overlays.

C

Dispenser Frame (dispenser models only)

The dispenser frame attaches to the panel with 4 screws.

To remove the dispenser frame:

1.Remove the four screws attaching the frame.

2.Pull the dispenser frame from the decorative panel.

3.To replace the frame, hold the frame to the panel and replace the screws.

6³⁄₁₆"
(15.7 cm)			Side Offset
Top Offset		Bottom Offset	¹⁄₂" (12.7 mm)
		¹⁄₂" (1.27 cm)
1⁵⁄₈" (4.13 cm)
22"
(55.9 cm)
		Handle-
		Side Offset
A		¹⁄₄"
		(6.4 mm)
	70¹⁄₂"	70¹⁄₂"
	(179.1 cm)	(179.1 cm)
33¹⁄₄"
(84.5 cm)
A	A	B
Bottom Offset		Bottom Offset
¹⁄₈" (3.2 mm)		¹⁄₈" (3.2 mm)

A

C

A. Decorative panel

B. Refrigerator door

C. Dispenser frame

B

Model D E F

3614¹/₄" (36.20 cm) 19¹/₄" (48.90 cm) 33³/₄" (85.73 cm)

4216³/₄" (42.55 cm) 22³/₄" (57.79 cm) 39³/₄" (100.97 cm)

48 19¹/₄" (48.90 cm) 26¹/₄" (66.68 cm) 45³/₄" (116.21 cm)

The dispenser frame overlaps the dispenser cutout by ⁵⁄₁₆"

(0.78 cm) on each side and ¹⁄₂" (1.27 cm) on the top and bottom.

AA

A. ¹⁄₂" (1.27 cm) Overlap

14