KitchenAid KUDH24SE manual Changing a setting, Adding dishes during a cycle, Drying system

Changing a setting

During the first 2 minutes of a cycle

Press new Wash Selection and Option pads.

After the first 2 minutes of

acycle

1.Press the Cancel pad to drain any water

and to reset the control.

2.Open the door and check the detergent dispenser to be sure it is properly filled for the new cycle.

3.Close the door.

4.Press new Wash Selection and Option pads, then press the Start pad.

Adding dishes during a cycle

You can add an item to the dishwasher during the first 10 minutes of the cycle.

1.Unlatch the door to stop the cycle. Wait a moment for the spray action to stop before opening the door.

2.Open the door and add the dishes.

3.Close the door.

4.The dishwasher will start automatically

after a 5-second pause when you close the door.

Drying system

During drying, vapor escapes through the vent at the upper left corner of the door. This is normal. The vapor is the result of moisture in the dishwasher being removed during drying.

IMPORTANT: The vapor is hot. Do not touch the vent during drying.

II ---