KitchenAid KUDP01TJ Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle

		Use this cycle for pre-rinsed
		and lightly-soiled loads.
		During the heated dry, the				Use main
		heating element cycles on
		and off.				detergent
						dispenser section.
Soil	Rinse	Main	Rinse	Purge†	Final	Dry	Time	Water
Level		Wash			Heated		(min)	Usage
Sensed					Rinse			(gal/L)
	●	●	●		●	●	79*	7.1-8.6
Heavy		120°F			135°F	cycled		/27-33
		(49°C)			(57°C)
	●	●		●	●	●	71*	5.5/21
Light		120°F			135°F	cycled
		(49°C)			(57°C)
		Use this rinse cycle for
		rinsing dishes, glasses, and
		silverware that will not be				Do not use
		washed right away.
						detergent with this
						cycle.
Soil	Pre-	Main	Rinse	Rinse	Final	Dry	Time	Water
Level	Wash	Wash			Heated		(min)	Usage
Sensed					Rinse			(gal/L)
				●			10	1.8/7

†A small amount of water is run through the pump to remove soil particles between the main wash and final rinse.

NOTES:

■The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary from the numbers above as the sensor adjusts the cycle for the best wash performance.

■In the Normal cycle, the dishwasher pauses while soaking. Soaking helps loosen soils on dishes for brilliant results.

Canceling a Cycle

Anytime during a cycle, press

CANCEL/DRAIN glows. The dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely. The light goes off when the dishwasher finishes the drain.

To stop the drain

You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

Press a new cycle and/or options.

After the first minute of a cycle

1.Press

CANCEL/DRAIN glows. The dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely.

2.Check the detergent dispensers. If the main wash cup has opened and the detergent washed away, refill the cups as needed.

3.Close the door.

4.Press a new cycle and/or options.

5.Press START.

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.

To add items

1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door. If the detergent dispenser cover is still closed, add the item.

3.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5 second pause.

12