Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
Press START to repeat the same cycle and options as the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.
Hi-Temp Scrub
Select this option to heat the water during parts of the cycle, and add a rinse. Higher water temperatures and an extra rinse helps clean tough soil.
This option adds heat, water and wash time to the cycle.
Control Lock
Use Control Lock to prevent your dishwasher from accidentally being turned on. Use Control Lock, also, to prevent accidental cycle or option changes during a cycle.
When CONTROL LOCK is lit, all buttons are disabled.
NOTES:
■The dishwasher door can be opened while the controls are locked.
■You can turn on the Lock while the dishwasher is running.
To turn on the Lock
Press and hold
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
NOTE:
Sani Rinse
Select this option to raise the water temperature in the final rinse to approximately 160°F (71°C) for 10 minutes. Sani Rinse adds heat and time to the cycle. In the Normal cycle, this high- temperature rinse sanitizes your dishes and glassware in accordance with the NSF International Protocol for Sanitization and Cleaning Performance of Household
NOTE: Sani Rinse is an option with the Heavy and Normal cycles.
Energy Saver Dry
Select this option to dry dishes without heat and save energy. Energy Saver Dry is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.
NOTE: Rinse Only automatically uses this option. Energy Saver Dry is an option with all other cycles.
To turn off the Lock
Press and hold ENERGY SAVER DRY for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
To delay the start
1.Close the door.
2.Select a wash cycle and options.
Press DELAY HOURS 1 time for a
2 4 8
The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.
3.Press START.
NOTE: To cancel the delay, press DELAY HOURS until no number is lit or press START.
IMPORTANT:
■Operate your dishwasher only when you are at home.
■If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.
13
