KitchenAid LI3ZGC/W10320581E Non-Vented Recirculating Installation Filters, A Bc

Models: LI3ZGC/W10320581E

1 36
Download 36 pages 61.55 Kb
Page 15
Image 15
Non-Vented (Recirculating) Installation Filters

Non-Vented (Recirculating) Installation Filters

The charcoal filter is not washable. It should last up to 6 months with normal use. Replace with Charcoal Filter Kit Number W10272068.

To Replace Charcoal Filter:

1.Cover the grille that covers the blower motor with the charcoal filter so that the slots on the filter correspond to the pins on the sides of the motor grille.

A BC

A. Charcoal filter

B.Pins

C.Blower motor

2.Turn the charcoal filter clockwise to lock it.

3.Repeat steps 1-2 on the other filter.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To avoid damage or decreasing the life of the new lamp, do not touch lamp with bare fingers. Replace lamp, using tissue or wearing cotton gloves to handle lamp.

If new lights do not operate, make sure the lamps are inserted correctly before calling service.

1.Disconnect power.

2.Use a flat-blade screwdriver and gently pry the light cover loose.

3.Remove the lamp and replace with a 120-volt, 40-watt maximum, halogen lamp made for a G-9 base.

4.Replace the light cover.

5.Reconnect power.

15

Page 15
Image 15
KitchenAid LI3ZGC/W10320581E Non-Vented Recirculating Installation Filters, To Replace Charcoal Filter, A Bc