KitchenAid S-302 Dimensions for built-in area, Dimensions for tipping product, +I- 118” tolerance

Dimensions for built-in area

Personal Injury/Property

Damage Hazard

l Unit is top-heavy and may tip forward when the doors are opened.

l A solid soffit or 2” wood block is required above the refrigerator to prevent tipping during use.

l If solid soffit is more than 1 inch above refrigerator, a wood block must be installed on the wall noi more than l/4 inch above the refrigerator cover.

Failure to follow these instructions could result in personal injury or property damage.

Width and depth of the built-in area are determined by the type of installation. The built-in refrigerator can be installed with the doors flush with the wall, with the doors protruding from the wall, or with side panels enclosing refrigerator. Select one method of installation and use the dimensions given for that method as shown.

Height of built-in area can range from a minimum of 82-l/2” to 84-3/4”. Optional top grilles may be required for enclosures less than 83-58”. Height dimensions with optional top grilles are given on page 4.

+I- 118” tolerance

iilrll

irounded electrical outlet location

Wall plumbing location

7yygJ

Floor plumbing location

Electrical outlet should be centered within shaded area.

can be cut anywhere wilhin shaded areas.

Dimensions for tipping product

87-l/16”		95-112”
Front		Side
tipping		tipping
radius	c	radius	L	d

Page 3