3.Thread the provided nut onto the water valve as shown.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

A.Bulb

B.Nut (provided)

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See “Prepare the Water System.”

NOTE: It may take up to 24 hours for your ice maker to begin producing ice.

Prepare the Water System

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Open the freezer door and turn off the ice maker. For Style 1, lift up the wire shutoff arm as shown. For Style 2, move the switch to the OFF (right) setting as shown. The ON/OFF switch is located on the top right side of the freezer compartment.

Style 1

Style 2

NOTES:

■If your model has a base grille filter system, make sure the base grille filter is properly installed and the cap is in the horizontal position.

■Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

2.Use a sturdy container to depress the water dispenser bar until the water begins to flow. Flush the water system by dispensing and discarding 1.5 gal. (5.4 L) of water. Cleaning the system will take approximately 3 minutes and will help clear air from the line. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

3.Open the freezer door and turn on the ice maker. For Style 1, lower the wire shutoff arm. For Style 2, move the switch to the ON (left) position. Please refer to the “Ice Maker and Storage Bin” section for further instructions on the operation of your ice maker.

■Allow 24 hours to produce the first batch of ice.

■Discard the first three batches of ice produced.

■Depending on your model, you may want to select the maximum ice feature to increase the production of ice.

FactoryTrimKit

(on some models)

There may be an occasion when you will need to remove the factory-installed trim kit, such as moving the refrigerator to a new home or installing custom-made decorator panels. Please read all instructions before removing the trim kit and decorator panels.

Freezer Door

Refrigerator Door

 

 

B A

C

B A

A

B

A. Decorator panels

B. Filler panels

C. Handles

9

Page 8 Page 10
Page 9
Image 9
KitchenAid SIDE BY SIDE REFRIGERATOR manual Prepare the Water System, FactoryTrimKit, Complete the Installation, Style
Page 8 Page 10

SIDE BY SIDE REFRIGERATOR specifications

The KitchenAid Side by Side Refrigerator is a quintessential blend of style, functionality, and advanced technology, making it a popular choice among modern households. With its sleek design and stainless steel finish, this refrigerator is not just an appliance, but a statement piece for any kitchen decor.

One of the main features of the KitchenAid Side by Side Refrigerator is its spacious interior. It typically offers an impressive capacity, which allows ample room for storing groceries, beverages, and leftovers. The side-by-side design ensures that both the refrigerator and freezer sections are easily accessible, making organization simple and efficient.

The refrigerator is equipped with adjustable shelves, giving users the flexibility to configure the interior space according to their needs. This allows homeowners to store larger items, such as tall bottles or party platters, without any hassle. The shelf material is often made of glass, providing a sleek appearance and ease of cleaning.

KitchenAid employs advanced technology in their side-by-side refrigerators to enhance food preservation. The Adaptive Defrost feature intelligently modifies the defrosting cycle based on usage patterns, ensuring that energy is not wasted. Additionally, the Exterior Ice and Water Dispenser provides quick access to filtered water and ice, which is essential for any household. The dispenser's design minimizes spills and can accommodate larger containers for added convenience.

Another notable characteristic is the Complete Dual Cooling System. This system helps maintain optimal humidity levels in the refrigerator compartment while efficiently freezing food in the freezer. By having separate cooling systems, the ingredients are kept fresher for longer, and the transfer of odors between compartments is minimized.

For tech-savvy users, the KitchenAid Side by Side Refrigerator may include features such as a built-in digital display, allowing easy temperature adjustments and settings. Smart technology integration may also enable users to monitor the status of their refrigerator remotely through a smartphone app.

In terms of energy efficiency, many models feature Energy Star certification, indicating they consume less energy and reduce the household carbon footprint. This makes the KitchenAid Side by Side Refrigerator not only user-friendly but also environmentally conscious.

Overall, the KitchenAid Side by Side Refrigerator combines aesthetics with innovative functionality, making it an essential appliance for those who value efficient food storage and modern design. Whether you're a budding chef or simply seeking convenience, this refrigerator caters to all culinary needs.
Top Page Image Contents