3.Push the hole plugs into place on the opposite side of the door.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

Normal Sounds

Your new ice maker may make sounds that are not familiar to you. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces such as floors, walls and cabinets can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them.

■You will hear a buzzing sound when the water valve opens to fill the water reservoir for each cycle.

■Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the ice maker can also make noises.

■The high-efficiency compressor may make a pulsating or high pitched sound.

■Water running over the evaporator plate may make a splashing sound.

■Water running from the evaporator plate to the water reservoir may make a splashing sound.

■As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your ice maker.

■You may hear air being forced over the condenser by the condenser fan.

■During the harvest cycle, you may hear a “thud” when the ice sheet slides from the evaporator onto the cutter grid.

■When you first start the ice maker, you may hear water running continuously. The ice maker is programmed to run a rinse cycle before it begins to make ice.

ICE MAKER USE

How Your Ice Maker Works

When you first start your ice maker, the water pan will fill and the system will rinse itself before starting to make ice. The rinsing process takes about 5 minutes.

Under normal operating conditions, the ice maker will cycle at preset temperatures. The ice level sensor located in the ice storage bin will monitor the ice levels.

IMPORTANT:

■If the water supply to the ice maker is turned off, be sure to set the ice maker control to OFF.

■The ice maker is designed to make clear ice from the majority of water sources on a daily basis. If your results are unsatisfactory, your water may need to be filtered or treated.

The Ice Making Process

1.Water is constantly circulated over a freezing plate. As the water freezes into ice, the minerals in the water are rejected. This produces a sheet of ice with a low mineral content.

2.When the desired thickness is reached, the ice sheet is released and slides onto a cutter grid. The grid divides the sheet into individual cubes.

3.The water containing the rejected minerals is drained after each freezing cycle.

4.Fresh water enters the machine for the next ice making cycle.

9

Page 8 Page 10
Page 9
Image 9
KitchenAid W10206423A manual ICE Maker USE, Normal Sounds, How Your Ice Maker Works, Ice Making Process
Page 8 Page 10

W10206423A specifications

The KitchenAid W10206423A is a highly versatile and efficient appliance that enhances the culinary experience in any modern kitchen. Designed with attention to detail, this kitchen tool boasts several features and technologies that make it a must-have for both amateur cooks and professional chefs alike.

One of the standout features of the KitchenAid W10206423A is its powerful motor, which provides superior mixing capabilities. With an impressive wattage, the motor ensures consistent results whether you are whipping, kneading, or blending ingredients. This heavy-duty performance means you can tackle even the most demanding recipes with ease, making it an indispensable ally for baking, cooking, or food preparation tasks.

Equipped with a range of speed settings, the Kitchenaid W10206423A allows for personalized control over mixing techniques. From slow stirring for gentle ingredients to high-speed whipping for airy mixtures, the adjustable speeds provide the flexibility needed for a variety of recipes. This feature also minimizes splatter and promotes thorough ingredient incorporation, ensuring that your dishes yield professional-quality results.

Another characteristic that sets the KitchenAid W10206423A apart is its robust construction. Crafted from durable materials, this kitchen appliance is built to withstand the rigors of daily use. The design not only contributes to its longevity but also makes it easy to clean after use, enhancing your overall kitchen experience. The sleek design fits seamlessly in any kitchen décor, combining practicality with style.

Additionally, the KitchenAid W10206423A comes with a selection of attachments that broaden its functionality. From dough hooks to whisk attachments, these tools enable users to expand their culinary repertoire. Whether you're making bread, whipping cream, or mixing cake batter, the versatility of attachment options allows the appliance to adapt to various cooking needs.

In terms of safety, the KitchenAid W10206423A incorporates built-in features that ensure safe operation. The appliance is designed with a secure locking mechanism to prevent accidental start-ups, giving users peace of mind while they work.

In summary, the KitchenAid W10206423A is a powerful and adaptable kitchen appliance that caters to the needs of a diverse range of cooking tasks. With its robust motor, adjustable speed settings, durable construction, and versatility provided by various attachments, this model stands as an excellent investment for anyone looking to elevate their culinary skills. Whether you are a seasoned cook or just beginning your culinary journey, the KitchenAid W10206423A is sure to become an essential tool in your kitchen.
Top Page Image Contents