Complete Installation
1.Pull top drawer slide rails out and set top drawer on slide rails.
4.In the cabinet under the sink, coil excess drain hose and wrap with a zip tie.
WARNING
2 
2 
1
1
2.Pull slide rails forward until they snap into position.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
5.Plug in dishwasher or reconnect the power.
3.Push top drawer in and repeat above steps for bottom drawer.
| ON |
OFF | ON |
| |
OFF |
|
OFF |
|
6.Select the Rinse Only cycle and press START/RESUME. Allow the dishwasher to fill, rinse and drain. Check for leaks. If leaks are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the User Instructions or contact the dealer from whom you purchased your dishwasher.
16
