Install Panel Fasteners
1.Remove the 2 panel fasteners from the face of the inner door of the drawer.
2.Screw the 2 panel fasteners into the panel fastener pilot holes of the custom panel.
Mount the Custom Panel
Custom Decorative Panel Only
1.Remove the tape from the green ground wire on the custom decorative panel. The end of the green ground wire is factory- attached to the custom decorative panel.
2.Attach the ring connector end of the green ground wire on the custom decorative panel to the ring connector and ground screw on the dishwasher drawer intermediate panel.
A
B
A. Green ground wire
B. Ground screw
Custom Decorative Panel or Custom Wood Panel
1.Mount the custom panel to the drawer by aligning the panel fasteners to the 2 keyhole slots and insert the panel.
Custom Decorative Panel
Custom Wood Panel
2.To secure the custom panel onto the drawer, push the custom panel down until the top of the custom panel is flush with the top of the control panel.
3.Using the screws provided, secure the custom panel to the inner door by screwing through the inner door and into the ¹⁄₈" (3.2 mm) pilot holes.
18
