Allied Telesis AT-X510DP-52GTX manual Installing the Switch in an Equipment Rack

Chapter 4: Installing the Switch and its Power Supplies

Installing the Switch in an Equipment Rack

This procedure requires the following items:

ˆTwelve bracket screws (included with the switch)

ˆTwo equipment rack brackets (included with the switch)

ˆFlat-head screwdriver (not provided)

ˆCross-head screwdriver (not provided)

ˆFour standard equipment rack screws (not provided)

Installation guidelines may be found in “Choosing a Site for the Switches” on page 52. Here is the procedure for installing the switch horizontally or vertically in a 19-inch equipment rack.

Caution

The chassis may be heavy and awkward to lift. Allied Telesis recommends that you get assistance when mounting the chassis in an equipment rack.  E28

1. Place the unit upside down on a level, secure surface.

CONSOLE

												COL	HDX	FDX	ACT	LINK 10/100	ACT	LINK 1000
S2/52		50	48	46	44	42	40	38	36	34	32	30	28	26	24	22	20	18	16	14	12	10	8	6	4	2
S1/51	SFP+	49	47	45	43	41	39	37	35	33	31	29	27	25	23	21	19	17	15	13	11	9	7	5	3	1

Figure 25. Turning the Switch Upside Down

x510DP-52GTX

2668

2.Using a flat-head screwdriver, pry the rubber feet from the bottom of the switch, as shown in Figure 26.

21 01 8 6 4 2

11 9 75 3 1

x510DP-52GTX

2669

Figure 26. Removing the Rubber Feet

64