LEDs
Here are descriptions of the LEDs.
LEDs for the Twisted Pair Ports
Each twisted pair port has two LEDs that display link, activity and duplex mode information. The LEDs are shown in Figure 4.
Link/Activity |
|
| Duplex Mode | |
LED |
|
|
| LED |
|
|
|
|
|
Link/Activity
LED
Duplex Mode
LED
Figure 4. LEDs for the 10/100/1000Base-T Ports
The LEDs are described in Table 2 on page 25.
Table 2. LEDs on the 10/100/1000Base-T Ports
LED | State | Description | |
|
|
| |
|
|
| |
Link/ | Solid Green | A port has established an 1000 Mbps link to | |
Activity |
| a network device. | |
LED |
|
| |
Flashing | A port is transmitting or receiving data at | ||
| |||
| Green | 1000 Mbps. | |
|
|
| |
| Solid Amber | A port has established a 10 or 100 Mbps | |
|
| link to a network device. | |
|
|
| |
| Flashing | A port is transmitting or receiving data at 10 | |
| Amber | or 100 Mbps. | |
|
|
| |
| Off | A port has not established a link with | |
|
| another network device or the LEDs are | |
|
| turned off. To turn on the LEDs, use the | |
|
| ||
|
|
|
25
