Allied Telesis AT-X510DP-52GTX manual LEDs for SFP+ Slots

Chapter 1: Overview

LEDs for the

SFP+ Slots

Table 2. LEDs on the 10/100/1000Base-T Ports (Continued)

LED	State	Description
Duplex	Green	A port is operating in full duplex mode.
Mode
	Amber	A port is operating in half-duplex mode at 10
LED
		or 100 Mbps. (Half-duplex mode does not
		apply to 1000 Mbps operation.)
	Flashing	Collisions are occurring on a port operating
	Amber	at 10 or 100 Mbps.

The LEDs for the SFP+ slots are located between the slots, as shown in Figure 5. Each SFP+ slot has one LED. The left-hand LED is for the top slot and the right-hand LED is for the bottom slot.

SFP+ Slot LEDs

Figure 5. SFP+ Slot LEDs

The LEDs are described in Table 3.

26