x510DP-52GTX Installation Guide
To install an SFP or SFP+ transceiver, perform the following procedure:
1.Remove the dust plug from a transceiver slot on the switch.
Figure 69 on page 113 shows the dust plug being removed from a port.
25 |
|
|
| |
| SF |
|
|
|
| P+ |
|
|
|
| /2 | 7 |
|
|
2 | 6 |
| CON |
|
|
|
|
| |
| S2/2 |
| SO | LE |
| 8 |
| ||
2675
Figure 69. Removing the Dust Plug from an SFP+ Slot
Note
When VCStack is enabled on the switch, slots S1/51 and S2/52 are reserved as stacking ports and may not be used for regular SFP or SFP+ transceivers.
2.Remove the transceiver from its shipping container and store the packaging material in a safe location.
3.If you are installing the transceiver in a top slot, position the transceiver with the Allied Telesis label facing up. If you are installing the transceiver in a bottom slot, position the transceiver with the label
facing down.
113
