Allied Telesis AT-X510DP-52GTX manual Features, 10/100/1000 Mbps Twisted Pair Ports SFP+ Slots

Chapter 1: Overview

Features

Here are the features of the AT-x510DP-52GTX switch:

10/100/1000 Mbps Twisted Pair Ports

SFP+ Slots

Here are the basic features of the 10/100/1000 Mbps twisted pair ports:

ˆ48 ports per switch

ˆ10Base-T, 100Base-TX, and 1000Base-T compliant

ˆIEEE 802.3u Auto-Negotiation compliant

ˆAuto-MDI/MDIX

ˆ100 meters (328 feet) maximum operating distance

ˆIEEE 802.3x flow control in 10/100Base-TX full-duplex mode

ˆIEEE 802.3x backpressure in 10/100Base-TX half-duplex mode

ˆIEEE 803.3z 1000Base-T flow control

ˆJumbo frames up to 13KB

ˆRJ-45 connectors

Here are the basic features of the four SFP+ slots on the switches:

ˆSupports 10Gbps, 10GBase-SR/LR fiber optic transceivers

ˆSupports 10Gbps AT-SP10TW direct connect twinax cables with SFP+ transceiver-style connectors

ˆSupports 1000Base-SX/LX SFP transceivers

ˆSupports single-port BiDi 1000Base-LX SFP transceivers

ˆSupports 1000Base-ZX SFP transceivers

Note

The SFP+ slots do not support 100Mbps 100Base-FX transceivers.

Note

SFP and SFP+ transceivers must be purchased separately. For a list of supported transceivers, contact your Allied Telesis distributor or reseller.

Note

SFP+ slots 51 and 52 are initially configured as stacking slots for the VCStack feature. If you intend to use the switch as a stand-alone unit, you must disable the VCStack feature before using the slots with standard SFP or SFP+ transceivers. See Chapter 5, “Configuring the Switch for Stand-alone Operations” on page 77 for instructions.

16