Eclipse - Fujitsu Ten CD7000 Installing the main unit, English English Español Français

English

English Español Français

Installing the main unit

- Installation angle -

Tip
	Front

To maintain proper function, the main unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, CD skipping and improper CD and Memory Stick ejection may occur.

30˚ or less

Level (reference)

- Installation preparation -

Tip Detachable panel

When it is not required to detach the front control panel from the main unit, use the provided screw to attach the control panel to the main unit.

13 Screw

- Mounting the main unit (If installing the main unit using the mounting sleeve) -

Italiano Nederlands Svenska

Tip

•Carefully bind any excess length of wire that is connected to the main unit and secure it to an area of empty space in the vehicle so that it does not dislodge or interfere with the main unit or vehicle-side equipment. If the wires are not handled correctly, operating problems or short-circuits may occur, and this may result in the danger of fire or other accidents.

•Connect all wires before installing the main unit.

1Insert the mounting sleeve into the opening in the vehicle dashboard or console box.

2Use a screwdriver or a similar tool to bend the tabs in the mounting sleeve to secure the mounting sleeve.

Bend the mounting

Dashboard or	tabs.
console box

3 Mounting sleeve

- 10 -