English

English Español

System connection example

Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire is exceeded, fire and electric shocks may result.

The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result.

If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire insulating method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.

Tip

Install and connect all of the peripheral equipment before connecting them to the main unit.

Do not remove any of the protective caps (RCA, etc.) unless in use.

Be sure to wrap the connection wires with tape (PVC tape) to insulate them.

Adjust the external amplifier’s input level.

1)CD7000 + EXTERNAL EQUIPMENT (MP3 PLAYER, MD PLAYER, etc.)

Français Italiano

NO CONNECTION (Do not remove cap)

AUX105

(sold separately)

TO THE RCA

L SIDE

OUTPUT

CONNECTORS OF

 

AN EXTERNAL

 

EQUIPMENTS

R SIDE

NO CONNECTION

Red

TO ACC (Power Supply)

Yellow

TO BATTERY+12V (Permanent Supply)

NO CONNECTION (Do not remove cap)

NO CONNECTION (Do not remove cap)

NO CONNECTION (Do not remove cap)

1 MAIN UNIT

ANTENNA PLUG

16P

White

White/Black

TO POWER ANTENNA RELAY (Supply)

Blue

Gray

FRONT

 

SPEAKERS

Orange/White

TO HEAD LIGHT SWITCH (Illumination (+) )

Gray/Black

TO TURN-ON WIRE OF EXTERNAL EQUIPMENT (Supply)

Blue/White

Black

Green

Green/Black

Nederlands Svenska

TO GROUND

2INTERCONNECTING WIRES (Power and speaker connector)

Purple

REAR

 

SPEAKERS

Purple/Black

 

Brown

 

Brown/Black

TO STEERING REMOTE CONTROL

 

- 8 -

Page 8
Image 8
Eclipse - Fujitsu Ten CD7000 installation manual System connection example, English English Español