4.Install 2 - 3.5 x 9.5 mm mounting screws. Leave approximately ¹⁄₄" (0.6 cm) space between the screw heads and hood to slide the brackets into place.

A

A. 3.5 x 9.5 mm screws

5.Position an upper bracket so that the large end of the keyhole slots are over the mounting screws. Then push the bracket toward the rear of the hood so that the screws are in the neck of the slots. Tighten the mounting screws, making sure the mounting screws are in the narrow neck of the slots.

A

B

A. Upper bracket

B. Mounting screws

6.Remove the grease filter by pulling the spring release handle and then pulling down the filter.

A

A. Spring release handle

7.Install a lower bracket with a 3.5 x 9.5 mm screw. Be sure to position the bracket slot as shown.

A

B

C

A. 3.5 x 9.5 mm screw

B. Lower bracket

C. Bracket slot

8.Install 2 - 5 x 18 mm adjusting screws.

A

A. 5 x 18 mm leveling screws

9.Place a level on either side the hood top and check the levelness of the hood front to back.

10.Adjust the adjusting screws so the hood is level from front to back. Repeat this procedure on the other side.

11.Drill 2 - ¹⁄₈" (3 mm) pilot holes and install 2 - 4.5 x 16 mm wood screws to secure the front of the range hood to the cabinet bottom.

A

A. 4.5 x 16 mm wood screws

10

Page 10
Image 10
KitchenAid W10342488A installation instructions Install 2 5 x 18 mm adjusting screws, 5 x 9.5 mm screws

W10342488A specifications

The KitchenAid W10342488A is a versatile and efficient appliance accessory designed to elevate your cooking experience in the kitchen. Compatible with various KitchenAid stand mixers, this attachment serves as a powerful helper for both novice cooks and seasoned chefs.

One of the standout features of the W10342488A is its robust construction. Made from high-quality materials, it ensures durability and longevity, allowing users to perform a wide range of culinary tasks without worrying about wear and tear. The attachment boasts a sleek and modern design that seamlessly integrates with the aesthetic of KitchenAid stand mixers, enhancing their overall appeal.

Equipped with a powerful motor, this attachment delivers consistent performance whether you’re mixing dough, whipping cream, or preparing batters. Its efficiency allows for faster meal preparation, making it a valuable addition to any kitchen. The bowl lift design ensures stability during operation, enabling users to mix even the heaviest ingredients with ease.

Another key aspect of the W10342488A is its user-friendly interface. Featuring intuitive controls, it simplifies the mixing process, allowing users to adjust speeds according to their needs. The attachment also includes various speed settings, providing flexibility for different recipes and textures. Whether you want to create a fluffy meringue or a dense bread dough, the W10342488A has you covered.

Moreover, the attachment incorporates advanced mixing technology that allows for the even distribution of ingredients. This ensures that your recipes turn out perfectly every time, enhancing the quality of your culinary creations. The design also promotes easy cleaning, with some components being dishwasher safe, contributing to a hassle-free cooking experience.

In addition to its practical features, the KitchenAid W10342488A is backed by the brand's reputation for innovation and quality. KitchenAid is known for producing reliable kitchen appliances that inspire creativity and efficiency in cooking. With the W10342488A, users are equipped to explore new recipes and culinary techniques, making it an essential tool for enhancing the home cooking experience.

In conclusion, the KitchenAid W10342488A attachment stands out for its durability, efficiency, and user-friendly design. Featuring advanced technology and versatile capabilities, this appliance is perfect for anyone looking to elevate their culinary skills while enjoying the time-saving benefits of a KitchenAid mixer.