KitchenAid W10579129B Tools and Parts, All Installations, Supplied in Kit

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the recommended tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

All Installations

Tools needed:

*Must be the proper size to connect your household wiring to 16-gauge wiring in dishwasher.

Other useful items you may need:

Supplied in Kit:

(4)Plastic studs (attached to each other by runners)

(4)Short screws (10-16 hex-head screw)

(4)Long screws (8-18 Torx® head screws)

(1)Template (located inside Use and Care Guide bag assembly)

(1)Instruction sheet (located inside Use and Care Guide bag assembly)

NOTE: The screws supplied are used for only ³⁄₄" thick wooden panel. If the wooden panel is less than ³⁄₄" thick, customer must purchase screws locally.

Other parts you may also need:

NOTES:

■Moisture barrier tape is recommended when installing a dishwasher under a wood countertop.

■Parts available for purchase in plumbing supply stores. Check local codes. Check existing electrical supply. See “Electrical Requirements” section. It is recommended that electrical connections be made by a licensed electrical installer.

In addition, for first-time installations

Tools needed:

Parts supplied:

Parts needed:

Parts needed:

Make sure all these parts are included in the literature package.

If parts are not included, call 1-800-422-1230. In Canada, call 1-800-807-6777.

(4) #10 x ¹/₂" wood screws (if installing custom front panels)

†®TORX, T15, and T20 are registered trademarks of Acument Intellectual Properties, LLC.

3