Drain Requirements

A new drain hose is supplied with your dishwasher. If drain hose is not long enough, use a new drain hose with a maximum length of 12 ft (3.7 m) (Part Number 3385556) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

Make sure to use an air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above subfloor or floor.

If required, the air gap should be installed in accordance with the air gap installation instructions. When you are connecting the air gap, a rubber hose (not provided) will be needed to connect to the waste tee or disposer inlet.

Water Supply Requirements

A hot water line with 20 to 120 psi (138 to 862 kPa) water pressure can be verified by a licensed plumber.

120°F (49°C) water at dishwasher.

³⁄₈" O.D. copper tubing with compression fitting or flexible braided water supply line (Part Number 4396897RP). NOTE: ¹⁄₂" minimum plastic tubing is not recommended.

A 90° elbow with ³⁄₄" hose connection with rubber washer (Part Number W10273460).

Do not solder within 6" (15.2 cm) of the water inlet valve.

Electrical Requirements

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70 - latest edition and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association 1 Batterymarch Park

Quincy, MA 02169-7471

You must have:

120-volt, 60 Hz, AC-only, 15- or 20-amp, fused electrical supply.

Copper wire only.

We recommend:

A time-delay fuse or circuit breaker.

A separate circuit.

If connecting dishwasher with a power supply cord:

Use UL Listed power supply cord kit (Part Number 4317824) marked for use with dishwasher.

Power supply cord must plug into a grounded

3 prong outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

If connecting dishwasher with direct wiring:

Use flexible, armored or nonmetallic

sheathed, copper wire with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

Use a UL Listed/CSA Approved strain relief.

6

Page 6
Image 6
KitchenAid W10579129B installation instructions Drain Requirements, Water Supply Requirements, Electrical Requirements

W10579129B specifications

The KitchenAid W10579129B is an essential appliance designed for both style and function, featuring a blend of innovative technologies and practical attributes, perfect for any kitchen enthusiast. This kitchen tool stands out due to its versatile capabilities, catering to a wide range of culinary tasks, which makes it an ideal assistant for both novice cooks and seasoned chefs.

One of the main features of the W10579129B is its robust construction. Built with high-quality materials, this appliance ensures durability and longevity, providing a reliable kitchen companion for years to come. The sleek design adds a touch of elegance, seamlessly blending with various kitchen decors while maintaining a professional edge.

In terms of functionality, the W10579129B boasts multiple speed options and settings, allowing users to adjust their mixing or processing speed according to their specific needs. This level of customization adds to the ease and efficiency with which users can prepare their favorite recipes. The appliance is equipped with a powerful motor that facilitates mixing, kneading, and whipping with impressive speed, minimizing prep time and increasing productivity.

One of the standout technologies included in the W10579129B is its planetary mixing action, which ensures thorough and even mixing of ingredients. This innovative feature means that the mix bowl's contents receive consistent attention from the attachment, preventing any unprocessed ingredients from being left behind. As a result, this appliance significantly enhances performance, particularly during complex baking tasks.

The W10579129B is also compatible with a wide range of attachments, allowing users to expand their culinary skills beyond basic mixing. These attachments, available separately, include pasta rollers, food grinders, and spiralizers, making the W10579129B a multifunctional tool that encourages culinary creativity.

Furthermore, the appliance's user-friendly controls make it easy to operate, even for those new to cooking. The included instructions are straightforward, ensuring that users can quickly grasp the functionalities and get started on their culinary adventures without delay.

Overall, the KitchenAid W10579129B is a remarkable appliance that combines stylish design with exceptional functionality, catering to the needs of any kitchen. From its durable construction and versatile speed options to its compatibility with various attachments, this kitchen essential is sure to enhance the cooking experience and elevate the quality of meals prepared. Whether baking bread, whipping cream, or preparing fresh pasta, the W10579129B is engineered to deliver outstanding results every time.