Appendix B: Technical Specification
This appendix contains the technical specifications specific to the DN530.
Inputs | Four |
|
| Type | Analogue, electronically balanced |
|
| female XLRs (Pin 2 hot) |
| Impedance | 10k ohms |
| Maximum input level | +22dBu |
| Common mode rejection | Typically, |
Outputs | Four |
|
| Type | Analogue, electronically balanced |
|
| male XLRs (Pin 2 hot) |
| Output impedance | <60 ohms |
| Maximum output level | +22dBu |
| Signal drive capability | <600 ohms |
External | Four |
|
sidechain | Type | Analogue, electronically balanced |
inputs |
| Jack sockets |
| Impedance | 20k ohms |
| Maximum input level | +22dBu |
| Common mode rejection | Typically |
Solo bus input One |
|
Type | Analogue, electronically balanced |
| female XLR (pin 2 hot) |
Input impedance | 20k ohms |
Maximum input level | +22dBu |
Common mode rejection | Typically |
Solo bus | One |
|
output | Type | Analogue, electronically balanced |
|
| male XLR (pin 2 hot) |
| Output impedance | <60 ohms |
| Maximum output level | +22dBu |
| Signal drive capability | <600 ohms |
|
|
|
Performance | Maximum gate gain | Greater than |
| reduction |
|
| Maximum accent gain | +12dB |
| Maximum signal level any | +22dBu |
| input or output |
|
| Noise at main output with | |
| unity gain |
|
| Distortion at 1KHz 0dBu | <0.05% |
| with steady unity gain |
|
| condition |
|
| Signal delay | 0 seconds |
| Frequency response | ±0.5dBu (input to output), 20Hz to |
|
| 20kHz |
| Dynamic range | >116dB (22Hz to 22kHz unweighted) |
DN530 |
|
Operator Manual | 33 |