Klark Teknik DN530 Connecting the power cable, Connecting the audio cables, Getting Started, 1 3

Chapter 3: Getting Started

Connecting the power cable

Making sure that the mains power at the power outlet is off, connect the mains cable supplied with your DN530 to the mains power outlet and then to the mains socket at the rear of your unit.

Connecting the audio cables

Making sure that all equipment is switched off, connect the DN530 to the rest of your audio equipment as shown in the following subsections. For information on balancing, see “Balanced/unbalanced audio” on page 37.

Channel I/O pin-outs

The following shows the channel I/O pin-outs for the male and female XLR connectors, on both balanced and unbalanced circuits.

Male XLR	Female XLR
chassis	chassis
connector	connector

1

3

1

3

2 2

Pin-out	Balanced I/O	Unbalanced I/O
1	Screen/ground	Screen/ground (not connected
		at unbalanced end)
2	Hot signal	Hot signal
3	Cold signal	Ground at unbalanced end

	DN530
10	Operator Manual