Connections

This section involves various methods of connecting the Blu-ray Home Cinema to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

CONNECTING THE SPEAKERS

Position of the Blu-ray Home Cinema

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m

Front Speakersei

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear.

Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speakers.

Centre Speaker f

It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.

Surround Speakers hj

Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 60 to 90cm above your ear, facing slightly downward.

*Unlike the front and centre speakers, the rear speakers are used to handle mainly sound effects and sound will not come from them all the time.

Subwoofer

The position of the subwoofer is not so critical. Place it anywhere you like.

Connecting The Speakers

1.Press down the terminal tab on the back of the speaker.

2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab.

3. Connect the connecting plugs to the back of the Blu-ray Home

Cinema by matching the colours of the speaker plugs to the speaker

Black

 

jacks.

 

Red

20

Page 20
Image 20
Samsung HT-BD7255R/XEE, HT-BD7255R/XEF, HT-BD7255R/EDC manual Connections, Connecting the Speakers