SYMPTOM | Check/Remedy |
•The main unit is not working.• Turn off the power and hold the STOP ( ■ ) button on the main unit for
(Example: The power goes out or a |
| longer than 5 seconds. |
strange noise is heard.) | Using the RESET function will erase all stored settings. | |
| ||
• The | Do not use this unless necessary. | |
normally. |
|
|
|
| |
The password for rating level has been | • While (NO DISC) message appears on the display of main unit, hold the | |
forgotten. |
| main unit's STOP ( ■ ) button for longer than 5 seconds. INITIAL |
|
| appears on the display and all settings will return to the default values. |
| • Press the POWER button. | |
| Using the RESET function will erase all stored settings. | |
| Do not use this unless necessary. | |
|
| |
Can't receive radio broadcasts. | • Is the antenna connected properly? | |
| • If the antenna's input signal is weak, install an external FM antenna in an | |
|
| area with good reception. |
|
| |
While listening to TV audio through the | • If the EJECT button is pressed while listening to TV audio using the | |
|
| D.IN or AUX functions, the BD/DVD functions are turned on and this mutes |
heard. |
| the TV audio. |
|
|
|
The icon appears on screen. | • | The features or action cannot be completed at this time because: |
|
| 1. The BD/DVD’s software restricts it. |
|
| 2. The BD/DVD’s software doesn’t support the feature (e.g., angles) |
|
| 3. The feature is not available at the moment. |
|
| 4. You’ve requested a title or chapter number or search time that is out of range. |
|
|
|
If the HDMI output is set to a resolution your | • | Press the STOP ( ■ ) utton (in front panel) for more than 5 seconds with |
TV cannot support (for example, 1080p), you |
| no disc inside. All settings will revert to the factory settings. |
may not see a picture on your TV. |
|
|
|
|
|
No HDMI output. | • | Check the connection between the TV and the HDMI jack of the |
|
| Home Cinema. |
| • | Check if your TV supports 576p(480p)/720p/1080i/1080p HDMI input |
|
| resolution. |
|
|
|
Abnormal HDMI output screen. | • | If random noise appears on the screen, it means that TV does not support |
|
| HDCP |
|
|
|
Cannot search for other access points | • | Check the Proxy is Off(Setup |
using USB wireless |
|
|
ENG
TROUBLESHOOTING ●
89