interface with A/V Control systems that can utilize a USB hookup. Please contact your authorized Klipsch dealer or Klipsch Technical support for more information.

“MIC IN” – Plug the supplied microphone into this jack when using the “ROOM CORRECTION” feature during setup. It is rec- ommended that the microphone be disconnected and stored in a remote location during normal use to avoid damage from loud playback levels.

“LINE OUT” – This pair of connections can be used as an alter- nate connection point for a second subwoofer. Be aware that the signal output from these jacks is effected by the “Volume”, “EQ”, “Lowpass”, “Lowpass Slope”, “Phase” and “Room Correction” settings of your RT subwoofer. The advantage of this is the ability of the RT subwoofers Adaptive Room Correction function to correct the response the second subwoofer, resulting in a more accurate response. If the secondary subwoofer is connected directly to your system, the RT subwoofer’s room correction will react to rather than control the response of the other subwoofer. As a result we recommend the following procedure when connecting a second subwoofer to these outputs.

Play a signal, such as one of the RT subwoofer’s two demo tracks, and set the volume control of the 2nd subwoofer to approximately match that of the RT subwoofer.

Defeat the secondary subwoofer’s low pass setting by selecting the “Bypass” or “LFE” mode or set the low pass control to its highest frequency if these options are not present.

Set the secondary subwoofer’s phase control to 0°

Run the “Room Correction” function on the RT subwoofer

As with the initial setup of your RT subwoofer, listen to a track with a repeating bass line in your listening position. Experiment with alternate phase settings on the secondary sub while repeating this track. If one of these alternate settings yields an increased amount of bass, choose that setting and run the RT subwoofer’s room correction function again.

Please note that if either the volume or phase settings on the secondary sub are changed after running the Adaptive Room Correction™ function you will have to run the RT subwoofer’s room correction again to compensate.

CARE AND CLEANING OF YOUR POWERED SUBWOOFER Your subwoofer has a sealed, wood veneer finish that should only require dry dusting or cleaning with a dry cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents. The brush attachment of your vacuum should remove any dust from your subwoofer enclosure and grille.

WARRANTY — U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United States or Canada. KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the date of purchase. To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must be presented or included to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call

1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will automatically terminate prior to expiration if this product is sold or otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or

a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not cover product sold AS IS or WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. `KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights, which vary from state to state.

Page 5
Image 5
Klipsch RT-12D, RT-10D manual Warranty U.S. and Canada only, Run the Room Correction function on the RT subwoofer