Klipsch THX ULTRA2 Rear-Paneloutputs, 1COMPONENT VIDEO OUTPUT, 2S-VIDEOMONITOR/RECORD OUTPUT

REAR-PANEL OUTPUTS

	1
2
	7
3	8

4

6

5

REAR-PANEL OUTPUTS

1COMPONENT VIDEO OUTPUT

One component video output is provided to connect to a monitor with a component video input. This output is active only for routing the three Component Video inputs (TV, DVD and Video) connected to component video sources.

2S-VIDEO MONITOR/RECORD OUTPUT

Two outputs are provided for S-video signals to route them to your moni- tor or recording device. The Stage One does not convert composite video input signals to S-video, although both composite and S-video signals can be used simultaneously.

3COMPOSITE VIDEO MONITOR/RECORD OUTPUT

Two outputs are provided for composite video signals to route them to your monitor or recording device. The Stage One does not convert com- posite video signals to S-video, although both composite and S-video sig- nals can be used simultaneously.

4TOSLINK OPTICAL DIGITAL OUTPUT

A Toslink optical digital audio output is provided on the rear panel. The signal from the selected digital source is routed to the Toslink digital out- put for recording purposes.

5ANALOG RECORD OUTPUTS

Two sets of outputs are provided on the rear panel to connect to recording devices, such as VCRs and tape decks. The analog signal from the selected source is routed to both record outputs. (Be careful when connecting these to a VCR line input if the VCR is the currently selected source and line-in is selected on the VCR. This can cause a feedback loop.)

6PREAMPLIFIER OUTPUTS

RCA outputs are provided for each channel. Connect these to the inputs of the corresponding power amplifier channels.

7RS-232 IN/OUT

The RS-232 port enables the Stage One to communicate with external control devices or to connect with expansion boxes for future upgradability. This port also allows for software upgrades to be installed to the Stage One.

812-VOLT DC OUTPUT

The 12-volt DC output can be used to trigger external devices that are driven by a 12-volt continuous DC output (up to 100mA).

11