Knoll Systems MVP64A MR60 keypad functions, RJ45 plug function identification, 12 34, Outputs

MVP64a Rear Panel

Source Inputs				Outputs
1	2	3	4
L			A1L+	A1L-	A2L-	A2L+
R			A1R+	A1R-	A2R-	A2R+

Note 1: Ideal speaker impedance is 6-8 ohms. When using 4 ohm speakers, individual channels may occasionally shutdown due to protection system.

Outputs

A3L+ A3L- B1L- B1L+

A3R+ A3R- B1R- B1R+

AC120V	234
8 amps

Outputs

B2L+ B2L- B3L- B3L+

B2R+ B2R- B3R- B3R+

	Room A1		Room A2		IR Emitters		Room A3	Room B1	Data
TrebleBassBalance		Treble Bass Balance		4/in 3 2 1		TrebleBassBalance Treble Bass Balance

	To Keypads								FD FC FB FA TOFF TON TRIG GND
Room A1	Room A2	Room A3	Room B1	Room B2	Room B3		Room B2	Room B3
						Treble Bass Balance Treble Bass Balance

RJ45 plug function identification

MR60 keypad functions

ground	ground	comm
not		2
used

Each RJ45 connector uses 4 wires from MR60 to MVP64a for power, communications and IR. 3 are common, 12VDC, GND (either) and IR.

12

34

Infrared receiver

Four source selection (this room and whole house) and four function selection buttons

Three bar volume level

indicators, blinks at min or max

comm	12 VDC infrared	comm
3		1

1 is uniqure 2-way comm (1, 2 or 3) Comm1 goes to keypad slot A1 or B1 Comm2 goes to keypad slot A2 or B2 Comm3 goes to keypad slot A3 or B3

FNC MUTE

DN UP

OFF

Mute button

Function select button

Volume up and down

(this room only or whole house when FNC selected)

Shut off this room only or

whole house off button (also blinks when remote control signal detected)

RJ45 plug color and pair wiring guide

comm 1 brown white/brown orange white/blue blue white/orange green

not used white/green