Attach Together
Figure 11
10.Fasten outer duct cover to plastic plate on the hood with four (4x8 mm) screw
Wiring to Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.
-Connect three wires (black, white and green) to house wires and cap with wire c
-Connect according to color: black to black, white to white, and green to gree
-Test the operation of the hood before moving on to next step. Make sure power to the hood.
Final Assembly
11.Turn power ON in control panel.
12.Make sure to leave this manual
Check all lights and fan operation. for the homeowner.
9
