![UNDER THE CABINET INSTALLATION](/images/new-backgrounds/77593/7759313x1.webp)
UNDER THE CABINET INSTALLATION
SAFETY WARNING
HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF IT IS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING, OR SERVICING.
Preparation before Installation
-Temporarily wire the hood to test for proper operation before installing.
-Peel protective film off the hood (if any).
-For installing under the cabinet with recessed bottom, attach
-Measure and create access opening for electrical wires under the cabinet.
Hood Installation
CAUTION: If required to move the cooking range to install the hood, turn off the p electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.
1.Puncture the knockout holes. Refer to Figure 2.
Figure 1
2.Unscrew the six screws on the bottom casing. Remove the bottom casing as show Figure 3. If necessary, arrange the electrical wire to run through the 1 dia the hood.
3.Use calculation on Table 1 and measurements on page 14 as references. Center in place beneath the cabinet and flush with the front of the cabinet. Refer t
Figure 3
5