4.Draw electrical wires through cabinet access opening.
5.Place screws (not provided) into the exact center of each knockout hole. Make screws are in place before tightening screws. CAUTION: MAKE SURE THE HOOD IS SECURE BEFORE RELEASING.
6.Connect the electrical wires. Refer to Wiring to Power Supply. If necessar electrical wire connections, push wires back into the wiring box. Access the connections underneath the hood by removing the bottom casing from the six scr Before reattaching the bottom casing, make sure wires do not slip between moto impellers, or any moving parts to prevent any damage. NOTE: Be careful when electrical screwdriver, damage to the hood may occur.
Wiring to Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.
-Connect three wires (black, white and green) to house wires and cap with wire c
-Connect according to color: black to black, white to white, and green to gree
-Test the operation of the hood before moving on to next step. Make sure power to the hood.
Final Assembly
7.Turn power ON in control panel.
8.Make sure to leave this manual
Check all lights and fan operation. for the homeowner.
6
