3-22 A-61588 July 2008
Fax settings You must have the optional fax modem accessory fCAT No. 128 0528)
for the Scan Station 100 and it must be properly connected before
configuring fax settings. For instructions on installing the fax modem,
see the section entitled, “Installing the optional fax modem” earlier in
this chapter.
1. Click the Fax icon. The Fax screen will be displayed.
2. From the Fax screen, click the LDAP Fax Field Tag option. The
virtual keyboard will be displayed allowing you to enter information.
Enter the LDAP Fax Field Tag for the tag to use when searching
LDAP for fax numbers. For more information, contact your network
administrator for the exact string to use (e.g., faxnumber). When
finished entering the LDAP Fax Field Tag, click Done.
NOTES:
LDAP may be used to search for fax numbers that are stored on
a corporate address book. LDAP is not required to use the fax
option.
The Sender’s FAX Number is informational and can also contain
text information. This field may be left blank.
LDAP credentials for E-mail LDAP must be set up to propertly
use LDAP for faxing. For more information refer to the section
entitled, “LDAP settings” earlier in this chapter.