4www.kodak.com/go/support
Getting started
Loading and removing the cartridge
IMPORTANT:
Replace the cartridge when the Cartridge light glows red (see Status lights,
page 28).
The cartridge may lock if there is a paper error. Clear the paper error (see
Printing problems, page21
) and make sure the Paper light is off before
you remove the cartridge.
1
2
3
Cartridge-release tab
Open the Cartridge door. Insert the cartridge into the
chamber until it clicks into place.
4Close the door.
Rotate the cartridge spool
clockwise just enough to remove
the ribbon slack.
IMPORTANT: Too many rotations
may reduce the number of prints
you can make.
• To remove the cartridge, push
Cartridge light
• Replace the cartridge when the
Cartridge light glows red.
up on the Cartridge-release tab.