www.kodak.com/go/support 15
5Printing from a computer
Connecting to a computer
IMPORTANT:
Make sure your camera or other device is NOT connected when you
connect the photo printer to the computer.
1Make sure Kodak EasyShare software is installed on
the computer (see Installing the software, page12).
2Turn the photo printer off.
3Plug the labeled end of the USB cable (included)
into the labeled USB port on your computer. See
your computer documentation for details.
4Plug the other end of the USB cable into the USB
connector on the back of the photo printer.
5Turn on the photo printer.
NOTE: On Windows operating systems, a new hardware wizard runs
when the printer is connected for the first time. See your
computer documentation for details.