Using your camera
Using the camera under water
The camera does not float. To prevent it from sinking, secure it with the strap. (See a floating accessory strap at www.kodak.com/go/accessories.) To keep the camera waterproof, tightly close and latch all doors. Do not open doors in water or when hands are wet. Waterproof integrity may be compromised if the camera is dropped. For more information, see page 22.
For the best focus and color balance under water:
1Press the Settings button 
, then choose Underwater Correction.
2Press 
to choose the On, then press OK.
3Press the Mode button 
, then take videos/pictures.
4When finished taking underwater videos/pictures, go back to Step 1 and turn Underwater Correction off.
3 meters (9.8 feet)
After using the camera in water
■Wipe off water or debris. If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then use a soft towel to dry it.
■If water has entered the camera, remove the card. Allow camera to
| Keep doors watertight | see page i |
|
|
|
|
|
www.kodak.com/go/support | 15 | ||
