For Table Top Processors*
Mix the brown toner solution at a dilution of 1:25 (1 part brown toner to 25 parts water). The temperature of the brown toner solution should be 1000F. If the machine speed varies, adjust it to allow for a minimum of 25 seconds of dwell time in the brown toner solution.
As an example, the tank setup for a Kodak Prostar Processor is the following:
Tank Solution
1Brown Toner
2Brown Toner
3Brown Toner
4Brown Toner
5Wash
6Wash
For this particular application, a constant machine speed of 10 feet/min yields a dwell time in the brown toner solution (all four tanks) of
*These are starting point recommendations. Final conditions will vary.
Procedure to Ensure Post-Processing Brown Toning
To ensure that the brown toner solution has changed the processed silver to silver sulfide, follow this procedure.
After the
Dichromate bleach is available by ordering the following from Solutek
Part Number | Description | Quantity |
P/N | Microfilm | 4 per case; in |
| Bleach and | 1 gallon bottles |
| Replenisher |
|
|
|
|
Conclusion
Kodak Brown Toner, using the procedures described above, has been shown to meet ANSI specifications for satisfactorily toned film as described in ANSI/NAPM IT
4 |