48 www.kodak.com/go/support
Troubleshooting
Camera ready light status
If... Try one or more of the following
Ready light does
not turn on and the
camera does not
work
Turn on the camera (page2).
Recharge the battery or install a new one (page1).
Mode dial was on when battery was reloaded. Turn Mode dial off, then
back on.
Ready light blinks
green
Picture is being processed and saved to the camera. Camera is
operating normally.
Camera is connected. Camera is operating normally.
Ready light blinks
red and camera
turns off
Recharge the battery or install a new one (page1).
Ready light glows
steady green
Shutter button is pressed halfway down. Focus and exposure are set.
Camera is operating normally.
Ready light glows
steady orange
The Mode dial is set to Favorites. Camera is operating normally.
Ready light blinks
orange
Flash is no t charge d. Wait. Resume p icture taking w hen the l ight st ops
blinking and turns off.
Auto exposure or auto-focus are not set. Release t he Shutter button
and recompose the picture.
Ready light glows
steady red
Camera’s internal memory or card is full. Transfer pictures to the
computer (page 17), delete pictures from camera (page14), switch
image storage locations (page33), or insert card with availab le
memory (page3).
Camera processing memory is full. Wait. Resume picture-taking when
the light turns off.
Card is read-only. Change image storage location to internal memory
(page3 6), or use a different card.