40 www.kodak.com/go/support
Troubleshooting
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■Transfer the picture to the computer (see page35).
■Take another picture. If problem continues, try internal memory and/or
another memory card.
Shutter button
does not work.
■Turn on the camera (see page 2).
■Transfer pictures to the computer (see page 35), delete pictures from
the camera (see page14), switch image storage locations (see
page27), or insert a card with available memory (see page 3).
Picture is too light. ■Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■Decrease Exposure Compensation (see page29).
Picture is not cle ar. ■Clean the lens (see page48).
■Make sure your camera is not in Close-up mode.
■Move so there is at least 2 ft (0.6 m) betwe en the camera and the
subject.
■Place the camera on a flat, steady surface or use a tripod.
Picture is too dark. ■Turn on the flash (see page 7).
■Move so there is no more than 10.5 ft (3.2 m) in wide angle and
5.9 ft (1.8 m) in telephoto between the camera and t he subject.
■Use Fill flash (see page7) or change your positio n so light is not
behind the subject.
■Increase Exposure Compensation (see page29).
Camera does not
recognize
SD/SDHC card.
■Purchase a certified SD or SDHC card.
■Insert a card into the slot, then push to seat (see page3).
Camera freezes up
when a card is
inserted or
removed.
■Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
If... Try one or more of the following