Kodak CD83, 1099969 manual Direct printing Pictbridge enabled Printer problems, Behind the subject

Getting help

Status	Solution
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 7) or change your position so light is not
		behind the subject.
	■ Move so that the distance between you and the subject is within the
		effective flash range. (See Specifications starting on page 44.)
	■ To automatically set exposure and focus, press the Shutter button
		halfway. When the framing marks turn green, press the Shutter
		button completely down to take the picture.
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 7).
	■ Move so that the distance between you and the subject is within the
		effective flash range. (See Specifications starting on page 44.)
	■ To automatically set exposure and focus, press the Shutter button
		halfway. When the framing marks turn green, press the Shutter
		button completely down to take the picture.
	■ In Smart Capture mode, adjust the Exposure Compensation (see
		page 31).
Direct printing (PICTBRIDGE enabled Printer) problems
Status		Solution
Cannot print to a		■ In the Setup menu, change the Computer Connection setting to
PICTBRIDGE Printer		Other Application (see page 35).

42 www.kodak.com/go/support