| Troubleshooting |
|
|
If... | Try one or more of the following |
In Review mode, | ■ Check the image storage location setting (see page 27). |
you do not see a |
|
picture (or the |
|
expected picture) |
|
on the LCD screen. |
|
|
|
In Review mode, a | ■ Transfer the picture to the computer (see page 34). |
blue or black | ■ Take another picture. If problem continues, try internal memory and/or |
screen is displayed | |
instead of a | another memory card. |
| |
picture. |
|
|
|
Shutter button | ■ Turn on the camera (see page 2). |
does not work. | ■ Transfer pictures to the computer (see page 34), delete pictures from |
| |
| the camera (see page 14), switch image storage locations (see |
| page 27), or insert a card with available memory (see page 3). |
| |
Picture is too light. | ■ Move so there is at least 2 ft (0.6 m) between the camera and the |
| subject. |
■Decrease Exposure Compensation (see page 28).
Picture is not clear. ■ Clean the lens (see page 48).
■Make sure your camera is not in
■Move so there is at least 2 ft (0.6 m) between the camera and the subject.
■Place the camera on a flat, steady surface or use a tripod.
Picture is too dark. ■ Turn on the flash (see page 7).
■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and 6.9 ft (2.1 m) in telephoto between the camera and the subject.
■ Use Fill flash (see page 7) or change your position so light is not behind the subject.
■ Increase Exposure Compensation (see page 28).
Camera does not ■ Purchase a certified SD card.
recognize SD card. ■ Insert a card into the slot, then push to seat (see page 3).
www.kodak.com/go/support | 39 |
