Kodak CX6330 manual Camera/Computer Communications

Chapter 10

Camera/Computer Communications

Problem	Cause	Solution
The computer	There is a problem with	See this file on the EasyShare
cannot	the configuration of the	software CD: USB.html Or, go to:
communicate	USB port on the	www.kodak.com/go/
with the	computer.	camerasupport
camera.
	Camera power is off.	Turn on the camera (page 6).
	Battery is not charged.	Recharge the battery (page 68).
	Some Advanced Power	See the Power Management section
	Management utilities on	of the laptop user’s guide to disable
	laptops turn off ports to	this feature.
	save battery life.
	USB cable is not	Connect cable to camera and
	securely connected.	computer port (page 61).
	Software is not installed.	Install the software
		(page 57).
	Software is installed	Disconnect the USB cable. Close all
	incorrectly.	open applications. Uninstall, then
		re-install the software (page 57).
		To uninstall, go to Start/Settings/
		Control Panel/Add/Remove
		Programs.
	Too many applications	Disconnect camera from the
	are running on the	computer. Close all software
	computer.	applications, reconnect camera.
	The Battery Monitor or	Close that software before starting
	similar software runs	the Kodak software.
	constantly.

78