94
Chapter 12

Upgrading Your Software and Firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera).
See www.kodak.com/go/cx6330downloads.

Tips, Safety, Maintenance

mAlways follow basic safety precautions. Refer to the Important Safety
Instructions booklet packed with your camera.
mDo not allow chemicals, such as suntan lotion, to come into contact with
the painted surface of the camera.
mIf the camera has been subjected to inclement weather or you suspect
water has gotten inside the camera, turn off the camera and remove the
batteries and card. Allow all components to air-dry for at least 24 hours
before using the camera again. If this does not resolve the problem,
contact customer support (page 88).
mBlow gently on the lens or camera screen to remove dust and dirt. Wipe
gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do
not use cleaning solutions unless they are designed specifically for camera
lenses. Do not wipe the camera lens or camera screen with chemically
treated eyeglass lens tissue. It may scratch the lens.
mWipe the outside of the camera with a clean, dry cloth. Never use harsh or
abrasive cleaners or organic solvents on the camera or any of its parts.
mService agreements are available in some countries. Contact a dealer of
Kodak products for more information.
mFor rechargeable battery disposal information, visit the Rechargeable
Battery Recycling Corporation Web site at www.rbrc.com.
mFor digital camera disposal or recycling information, contact your local
authorities. In the US, visit the Electronics Industry Alliance Web site at
www.eiae.org or the Kodak Web site at
www.kodak.com/go/cx6330support.