Kodak CX6330 Using the Auto Focus Framing Marks, While the Shutter Button is Pressed Half-way

Chapter 2

Using the Auto Focus Framing Marks

In Liveview, the framing marks indicate the area of your scene that the camera is focusing on. For the best possible pictures, the camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.

1Press the OK button to turn on Liveview.

2Press the Shutter button half-way and hold.

3The framing marks are displayed. When they turn red, focus is accomplished.

While the Shutter Button is Pressed Half-way:

Framing marks

Center focus

Center wide focus

Side focus

Center and side focus

Left and right focus

4Press the Shutter button the rest of the way down to take the picture.

5If the camera is not focusing on the desired subject (or if the framing marks disappear), release your finger, recompose the scene, and repeat Steps 2 and 3.

NOTE: Framing marks appear only when Liveview is on.

Framing marks do not appear in Landscape mode.

16