The image is not good (noise)

Possible causes and remedies:

1.The automatic image set-up is not activated. Run auto set-up by pressing the green button on the touch panel or run auto set-up from the menu.

2.The synchronization on the PC is not set optimally.

There is poor response from the Interactive Remote Control

Possible causes and remedies:

1.Check that nothing is blocking the IR receiver at the front of the KODAK DP850 ULTRA.

2.Make sure the remote is pointed towards the screen.

3.Make sure there is no more than 10m/33ft in distance to the projector.

4.Batteries might be low. Change batteries in the remote control.

5.Electromagnetic or optic noise may influence the remote control.

Turn off sharp fluorescent tubes, mobile phones etc that are near the projector.

34

No Image Appears

Possible causes and remedies:

1. The KODAK DP850 ULTRA has not been switched on. Check the ON/OFF switch at the back.

2.There is no electricity in the power outlet in the wall. Check that there is power in the power outlet. NOTE! When all connections to electricity are OK, there will be a green light at the control panel.

Contents

Page 34
Image 34
Kodak DP850 manual Image is not good noise Possible causes and remedies, No Image Appears Possible causes and remedies